A tent hangar is a metal frame covered with heavy-duty PVC fabric. In Kazakhstan it is used primarily as a temporary or seasonal solution. It is chosen not because it is better, but because it is faster and cheaper at the outset.
from 8,000 ₸/m²
tent cost
simple frame + PVC
3–7 days
installation
for a standard size
5–10 years
fabric service life
under Kazakhstan operating conditions
−40°C
climate limitation
fabric loses elasticity
Where a Tent Hangar Is Justified
- Temporary storage during construction of a permanent facility.
- Seasonal use — sheltering equipment or harvest for 3–4 months.
- Events and exhibitions — exhibition pavilions, trade canopies.
- Construction sites — sheltering materials and equipment.
- Rental business — the structure is dismantled and transported.
Limitations for Kazakhstan's Climate
Kazakhstan is one of the harshest climatic regions for tent structures:
Winter. At −30°C and below, PVC fabric loses elasticity and becomes brittle. Snow loads in Almaty and Karaganda regions can exceed the design values for standard tents.
Summer. At +40°C outside, the fabric heats the interior to +70°C — without ventilation this is critical for any stored goods.
Wind. Steppe regions (Aktobe, Kostanay oblasts) with winds of 25+ m/s require a reinforced frame.
Comparison with a Metal Hangar
| Criterion | Tent | Metal |
|---|---|---|
| Initial cost | 2–3 times lower | Standard |
| Service life | 5–10 years | 25–50 years |
| Total lifetime cost | Higher (fabric replacement) | Lower |
| Insulation | Not possible | Easy |
| Mobility | Dismountable | Stationary |
| Permits | Often not required | Required |
When the Tent Loses to Metal on Cost
With a planning horizon of 5+ years, a tent hangar ends up costing more than a metal one due to:
- PVC sheet replacement every 5–8 years (30–50% of original cost);
- repair of fastening elements;
- the impossibility of insulating it and reducing storage operating costs.
With a planning horizon of more than 3 years, a metal hangar is economically preferable.
We will calculate what is more cost-effective for your facility
We will compare the tent and metal options taking into account your operating period and region.
